Atlasworxs – Elite Series (BDL) DBM/Bottom Metals
https://atlasworxs.com/product-category/remington-700/
https://atlasworxs.com/product-category/remington-700/
We have two models of Retro Fit Levers (For Non Elite and For Elite). The reason we have two type of this lever is all to do with the shape of the trigger loop, even though the functionality is exactly the same. As the name suggests the Non Elite fits the following DBM's: https://atlasworxs.com/shop/atlasworxs-retro-fit-lever/ AW0038-B Rem 700 SA DBM, AW0111-B Rem LA DBM, AW0316-A Tikka T3 SA DBM, AW0402-A Tikka…
The answer is it works with both. The OEM Original Plastic Tikka T3 magazines have the same external dimensions irrespective of calibre. It is only the internal of the magazine that changes. Therfore only one magwell size is required and one Trigger Guard for both. https://atlasworxs.com/shop/atlasworxs-deluxe-kit-tikka-t3-t3x-otg-silver/
When going from the standard T3 set up (original T3 inlet), you will need to modify the existing stock as well as remove some material from the end of the alloy trigger block housing. This makes space to allow the 3.715" AICS Pattern Magazine to be able to travel all the way up. Here is the inlet plan is here.
Yes, All our Tikka T3 Shrouds are compatible with the M595 Model. https://atlasworxs.com/shop/atlasworxs-alloy-shroud-tikka-t3-t3x-black/
The answer is yes! However some inletting will be required which is common when switching to an AICS Pattern mag set up. Going from the Standard OEM Tikka T3 Mags and Trigger Guard, you will need to change the shape of your current footprint. Our inlet plan can be found here. It is worth noting that if you already have a stock inletted for an OEM CTR Bottom Metal (using…
The Atlasworxs Bottom Metal for the Tikka T3 / T3x Long Action accepts the AICS Pattern Mags which are 3.715" in length. Manufacturers of AICS Pattern Mags include Accurate Mag, AI, MDT, AICS amongst others. For more information on this DBM please see the link https://atlasworxs.com/shop/atlasworxs-bottom-metal-dbm-aics-tikka-t3-t3x-long-action/
We have added a new Bolt Knob to be compatible with our range of Tikka T3/T3x, Tikka T1/T1x and Sako A7 Bolt Handle kits. The knob has a 5/16-24 Thread with a black knurled anodized finish. It measures 33mm in Length x 20mm in Diameter reducing down to 11.20mm at the thread end to blend in with all Atlasworxs Bolt Handles https://atlasworxs.com/shop/atlasworxs-5-16-unf-bolt-knob-knurled-black/
We have now introduced a new series of Detachable Bottom Metals to suit the Remington 700 range. Like before they are designed to accept AICS Pattern magazines but what is different with the Elite Series is that the footprint is the same as the short action and long action BDL, meaning minimum stock inletting is required when putting one of these into a stock with a BDL inlet. They come…
A commonly asked question here at Atlasworxs is "we don't like the standard A7 magazines, can you make an AICS Bottom Metal to suit the A7". As we already sell aftermarket parts for the A7 and have established a good client base around this model we decided it was about time we got this project off the ground. There will be two Bottom Metals required, a short action…